VisioForge Drivers & DLLs

Issue: You receive the following error when attempting to Add Photos to a job. Could not load file or assembly ‘VisioForge.Controls.WinForms, Version=7.2.0.1, Culture=neutral, PublicKeyToken=e987dad4f52b3894′ or one of its dependencies. An attempt was made to load a program with an incorrect format. Cause: The wrong VisioForge drivers and/or DLLs are installed on the tablet causing the […]

Read More

Debug Mode

Rarely, you may be asked to run the Laser Templator software in debug mode. This allows us to record what occurs when it is opened, running and shutting down. From this information, we can glean specifics as to what certain issues you may encounter through normal use are caused by. Click Start Search for cmd.exe […]

Read More

Unknown USB (Device Decriptor Request Failed)

Issue When you plug in the USB cable from the LT-2D3D/LT-55 XL a notification bubble appears in the lower right corner of the screen. Unknown USB Device (Device Descriptor Request Failed) Cause The driver that is used to allow the encoder (how the laser measures angles) has been either updated to an incorrect Microsoft Driver. […]

Read More

Leica Error 256: “Receiver signal too high”

Issue: You receive the following error when attempting to take a measurement: Leica Error 256: “Receiver signal too high” Cause: This occurs when there is too much light interfering while the laser is attempting to take a measurement. Usually this is due to a brightly lit window allowing too much light onto the surface the […]

Read More

Non-Functioning LEDs on LT-2D3D

Issue: The LED on the side of the LT-2D3D Laser Templator does not turn on but the laser will turn on. Cause: A static shock to the metal charge jack on the LT-2D3D can potentially knock out the LEDs. The laser will still function normally but the power on LED will not illuminate and the […]

Read More

Import / Export Settings

To export your user settings: Navigate to File / Help / Import/Export Settings Click the browse button (…) next to Export Select a location to save your settings to and enter a name in the File Name field and press Save Check the boxes on the bottom next to the settings you wish to export […]

Read More

Create A new Drop-In Folder

Issue You want to remove the default drop-ins that come in the Laser Templator software. Cause Because of the software dependencies, you cannot remove the drop-ins that come in the Laser Templator software. Solution Create a new Drop-In folder for your personal drop-ins. Create a folder either in My Documents or on the Desktop named […]

Read More

DWG TrueView

Issue: You wish to view the drawing made on the LT-2D3D in a 3D mode but need a program to open the 3D file with. Cause: The LT-2D3D will only display the CAD drawing in 2D in the Laser Templator software. In order to view it in a full 3D mode, you will need to […]

Read More