View CAD Drawing In 3D

Issue: You wish to view the drawing made on the LT-2D3D in a 3D mode. Cause: The LT-2D3D will only display the CAD drawing in 2D in the Laser Templator software. In order to view it in a full 3D mode, you will need to open the filename.Internal 3D Image.dxf in another CAD program. We […]

Read More

Unable To Install .NET

Issue: The LT-55 XL software needs .NET 4.0 installed in order to run. When you attempt to install it, you receive the following error: HRESULT 0xc8000222 Cause: There is a problem with the WaAuServ process running on your computer and it needs to be restarted. Solution: Click Start Type cmd Right click Command Prompt and […]

Read More

Arcs Appearing As Line Segments

Issue: In AllenCAD, some arcs will appear as straight line segments and not arcs. Cause: The reason for this is that by default, AllenCAD attempts to render the drawing in the most efficient way possible. By doing this, instead of drawing every single arc that makes up the full arc, it will break it into […]

Read More

Launching Precision Laser Templator (PLT) on the iPAQ

There are 2 ways to launch our templating program. You can go through the Start Menu and tap on PLTv.1.xx-x or you can use the button on the bottom lower right on the iPAQ that looks like a curved arrow iTask Button). If you have downloaded a new version of the software from this website […]

Read More

LT-55 PLTv1.60 Program Update

PLTv.1.60: The last version of our LT-55 software which includes features previously released like the Rapidfire Measuring option, Auto-Fillet and Auto-Dimensions. To download this version, follow the instructions below. It is very important to download the correct version. Choosing the right program: On the iPAQ, while the socket card is attached to the top of […]

Read More

LT-55 Delete Precision File

We have found that many customers reset their iPAQ’s improperly that results in problems while launching the PLT program. The reason for this is when you have your SD Card or your Socket I/O Card in the top of the iPAQ, and hit the reset button, the physical address will be reassigned. An easy way […]

Read More

LT-55 Template Files

These are the template files that come standard with the LT-55. The files are located on the iPAQ in the “Templtes” folder of the SD Card. You can download them by clicking here.

Read More

Install OpenOffice

OpenOffice is an software suite that is a free alternative to Microsoft Office. You are welcome to use either but we supply OpenOffice already installed. If you need to install it on any other computers in your office, pleas follow the instructions below. Download OpenOffice by clicking here. Once downloaded, run the setup installation file. […]

Read More

Moraware’s JobTracker/Systemize

Version 2 of the Laser Templator software integrates some basic functionality of Moraware’s JobTracker and Systemize. We now allow the Laser Templator software to pull down basic job information from Moraware’s site into a job file and then upload all the job files directly into JobTracker and Systemize once you have finished templating. For instructions […]

Read More

AllenCAD Fonts Not Appearing

If you have entered fonts onto your drawing but when you open them in AllenCAD they are missing, this is because rarely a zero length font file gets created. This causes fonts to appear to be infintecimally small. To correct this issue, follow the steps below. Navigate to C:\Program Files\Allen Datagraph\AllenCAD Search for *.shx in […]

Read More