Current public release is 2.0.243.0. Any version higher than 2.0.243.0 is only released to testers and is currently in development.

-- 2.0.290.0 -- 05/09/15

Fixing issue saving on to certain paths on networked drives

-- 2.0.289.0 -- 04/28/15

Hopefully fixing brazil issue. Adding additional German translations.

-- 2.0.288.0 -- 04/22/15

Adding additional Chinese text.

-- 2.0.287.0 -- 04/21/15

Adding Traditional Chinese Adding additional German translations

-- 2.0.286.0 -- 04/20/15

Adding missing translated items.

-- 2.0.285.0 -- 04/02/15

Adding ability to flip the camera feed vertically and horizontally.

-- 2.0.284.0 -- 02/20/15

Fixing the control name on address book. Fixing issues on multiple user actions making sure its restricted to objects that can be handled to prevent errors. Clearing undos after reposition laser to prevent laser issues.

-- 2.0.283.0 -- 02/08/15

Adding missing Chinese text.

-- 2.0.282.0 -- 02/05/15

Fixing issue with some labels not being translating. Of note the Laser Mode menu item.

-- 2.0.281.0 -- 02/04/15

Adding round up area for Home Depot/Lowes Adding new Chinese font

-- 2.0.280.0 -- 01/15/15

Fixing selection issue in Slab Layout & Maximum Dimension. Fixing issue with Polylines not being the correct color.

-- 2.0.279.0 -- 01/12/15

Fixing save issue (object reference error)

-- 2.0.278.0 -- 12/30/14

Ensuring Chinese DXF files can be exported and then opened in DWG TrueView.

-- 2.0.277.0 -- 12/05/14

Adding single and dual outlets.

-- 2.0.276.0 -- 12/03/14

Adding missing swedish language files.

-- 2.0.275.0 -- 11/12/14

Updating German language file.

-- 2.0.274.0 -- 11/11/14

Adding user setting to include the shop sheet when printing allowing it to be defaulted on or off.

-- 2.0.273.0 -- 11/11/14

Allowing shop sheet to be added to the PDF (Print).

-- 2.0.272.0 -- 11/11/14

Adding default Notes accessible through advanced options. Starting to add shop sheet to printout. Attempting to fix the metric drop-in (0,0) movement.

-- 2.0.271.0 -- 10/27/14

Updating Polish UTF language file.

-- 2.0.270.0 -- 10/25/14

Fixing issue for duplicate pages with same name.

-- 2.0.269.0 -- 10/09/14

Fixing issue where Lock Control check is displaying below the Laser Templator program and unable to be seen. Should have been on Falcon.

-- 2.0.268.0 -- 10/07/14

Fixing Brazil localiation dxf issues. Fixing battery tester for Erik.

-- 2.0.267.0 -- 09/02/14

Adding new battery tester.

-- 2.0.266.0 -- 08/24/14

Fixing issue when templating a wall.

-- 2.0.265.0 -- 07/23/14

Allowing fractions in text boxes over drawing (fillet, backsplash, etc). Writing MachineSettings-2 as well.

-- 2.0.264.0 -- 07/16/14

Removing auto register.

-- 2.0.263.0 -- 07/10/14

Fixing Moraware import issue where file path is too long.

-- 2.0.262.0 -- 07/08/14

Adding option to show square area. Off by default. Fixing showing Edge Type if display color name is selected.

-- 2.0.261.0 -- 07/08/14

Rebuid of 2.0.260.0

-- 2.0.260.0 -- 07/07/14

Fixing issue where scaling will not allown drawing to be scaled smaller.

-- 2.0.259.0 -- 07/07/14

Adding "Remove Origional" to offset polygon. Updating manual. Updating Continuous Break threshold to be tighter.

-- 2.0.258.0 -- 05/28/14

Updating Polish UTF language file.

-- 2.0.257.0 -- 05/12/14

Updating manual. Adding 90 day license key.

-- 2.0.256.0 -- 04/29/14

Fixing template wall issue where the function would exit after 1 measurement.

-- 2.0.255.0 -- 04/16/14

Moving image files if job location changes. Fixing JobTacker Search. Fixing DXF file output of arc far off in distance.

-- 2.0.254.0 -- 03/17/14

Attempting to correct issue with shop sheet and printout (cutting off dimensions).

-- 2.0.253.0 -- 03/10/14

Fixing issue where sometimes Template Plane will only take 1 or 2 points to establish a plane instead of 3.

-- 2.0.252.0 -- 03/07/14

Adding ability to change photo editing application. Fixing issue writing to file for licenses key.

-- 2.0.251.0 -- 03/04/14

Fixing startup issue with version 250.

-- 2.0.250.0 -- 03/04/14

Attempting another fix on the 3D Reposition laser.

-- 2.0.249.0 -- 03/03/14

Fixing License Key issue where it resets. Final fix for Metric drop ins. If the folder doesn't contain imperial or metric samples display everything. LTXL-10

-- 2.0.248.0 -- 02/28/14

Allow colors that the application defaults with to be removed (except black).

-- 2.0.247.0 -- 02/27/14

Adding Metric Quick Actions on new installs. Adding Metric Drop-ins. Fixing bad Eruopean Seam drop in.

-- 2.0.246.0 -- 02/24/14

Fixing several found issues with user settings saving improperly.

-- 2.0.245.0 -- 02/20/14

Adding save notification Setup Com Ports. Writing the enable_lt_3d_laser setting as well.

-- 2.0.244.0 -- 02/18/14

Another try at reposition laser 3D.

-- 2.0.243.0 -- 02/17/14

Removing Repo Laser 3D until we get it fully up and running.

-- 2.0.242.0 -- 02/17/14

Removing Repo Laser 3D until we get it fully up and running.

-- 2.0.242.0 -- 02/16/14

Adding Swedish text. Moving to 3 point 3D reposition laser .

-- 2.0.241.0 -- 02/14/14

Attempting to fix reposition issue.

-- 2.0.240.0 -- 02/14/14

Fixing Template Plane to calibrate LT-2D3D.

-- 2.0.239.0 -- 02/13/14

Adding missing swedish translations. Fixing 3D Reposition Laser. Fixing not canceling user action if laser on or off is pressed.

-- 2.0.238.0 -- 02/11/14

Only writing machine file if it changed.

-- 2.0.237.0 -- 02/10/14

Adding Reposition laser for 3D. Finalizing reposition laser when in template wall.

-- 2.0.236.0 -- 02/09/14

Attempting to fix user settings missing. Fixing write access issue when printing a shop sheet. Step one of fixing template wall (left right top. Adding mixing text for Czech language support. Fixing issue with template wall drawing mirrored - horizontal or vertical.

-- 2.0.235.0 -- 02/07/14

Adding Construction Symbols to installed templates.

-- 2.0.234.0 -- 01/29/14

Snapping 3D output points if less then 1/8 of an inch from each other Not saving settings if power mode changed in an attempt to fix missing settings Fixing issue with pressing enter on job notes (no long close dialog box)

-- 2.0.233.0 -- 01/27/14

Additional modifications for pool version - Replacing Laser Templator with Pin Point Allowing for custom splash screen with a logo.png, logo.jpg, or logo.bmp in the application directory.

-- 2.0.232.0 -- 01/17/14

Fixing total area issue.

-- 2.0.231.0 -- 01/16/14

Replacing periods with underscore in file names.

Preventing line created after hitting StartNewLine or LaserOff.

-- 2.0.230.0 -- 01/13/14

Fixing total squared Area.

Expanding directory in drop ins with a single click in addition to a double click.

-- 2.0.229.0 -- 01/09/14

Adding context menu that allows address book items to be removed.

Allowing large text boxes to press enter without closing the window.

Correcting issue with several DXF files related to polygon arcs.

-- 2.0.228.0 -- 01/08/14

Adding begining support for pool version.

Fixing issue with not enough space to enter distances.

Clicking ok if user hits enter in a dialog box.

-- 2.0.227.0 -- 01/06/14

Adding service implementation.

Adding address book.

Adding flip camera image for surface tablet issue.

Prevent calculator when adding an email address to the address book..

-- 2.0.226.0 -- 12/16/13

Fixed english DXF issue.

-- 2.0.225.0 -- 12/11/13

Fixing template wall if 3 point is higher then first 2.

-- 2.0.224.0 -- 12/11/13

Changing desktop icon to Laser Templator.

Removing one last reference to XL.

-- 2.0.223.0 -- 12/11/13

Fixing issue on registration form with trial keys.

Fixing ORD issue with importing upside down and flipped.

-- 2.0.222.0 -- 12/09/13

Fixing installer to change LT-55 XL to Laser Templator for program name.

-- 2.0.221.0 -- 12/09/13

Failed Build.

-- 2.0.220.0 -- 12/08/13

Fixing save issue when saving Chinese DXF files.

-- 2.0.219.0 -- 11/26/13

Making tips not random.

Fixing Comport screen and.

-- 2.0.218.0 -- 11/21/13

Adding machine settings-1 and machine settings-2 to setup comports app.

-- 2.0.217.0 -- 11/14/13

Updating installer package.

-- 2.0.216.0 -- 11/14/13

Fixing issue with new manual.

-- 2.0.215.0 -- 11/13/13

Fixing Image on Splash Screen and About Box.

Updating manual.

-- 2.0.214.0 -- 11/12/13

Adding additional russian and czech text.

Moving to Laser Templator.

Attempting to fix registration issue.

-- 2.0.213.0 -- 11/05/13

Fixing estimate rounding issue.

Not including template wall points in 3D export.

Renaming template wall to template plane.

-- 2.0.212.0 -- 10/29/13

Adding Template Wall 3 Point.

Adding missing file.

Fixing 3 point plane for walls.

-- 2.0.211.0 -- 10/29/13

Fixing an ORD issue.

-- 2.0.210.0 -- 10/22/13

Fixing several foreign language issues.

Fixing scaling issue when using dropins.

-- 2.0.209.0 -- 10/21/13

Fixing open of DXF files from European customer.

-- 2.0.208.0 -- 10/14/13

Fixing issue with AdditionalJobItemFileAdapter.

Adding missing german translations.

-- 2.0.207.0 -- 10/08/13

Fixing issue saving Ord.

Fixing issue drawing dxf.

-- 2.0.206.0 -- 10/07/13

Adding additional Swedish text.

-- 2.0.205.0 -- 10/07/13

Correct metric issue on draw circle. "in" being showing instead of "mm"

-- 2.0.204.0 -- 10/04/13

Adding swedish for carl.

-- 2.0.203.0 -- 10/01/13

Fixing unit of measure for metric quick actions when in imperial mode.

-- 2.0.202.0 -- 09/30/13

Fixing long ORD File names.

Fixing exception when exporting ORD files.

Ensuring ORD files are included in emails.

-- 2.0.201.0 -- 09/26/13

Fixing issue with 3D points not exporting correct Z value.

Converting from internal measurement to user defined amount when exporting z coordinates.

-- 2.0.200.0 -- 09/25/13

Fixing issue with 3D image per DXF page.

-- 2.0.199.0 -- 09/24/13

Correcting client issue in the select color user action.

Adding ability to turn off 3D dxf file.

Fixing issue with template wall when adding a one point line.

Fixing performance issue with large files (reported by Carl).

-- 2.0.198.0 -- 09/10/13

Fixing issue with drop ins including extra box.

-- 2.0.197.0 -- 08/30/13

Fixing object ref error from save screen.

-- 2.0.196.0 -- 08/28/13

Fixing email issue if job name has a space at the end.

-- 2.0.195.0 -- 08/27/13

Fixing connect spelling mistake.

-- 2.0.194.0 -- 08/22/13

Ensuring that registration and customer info show in front of the splash screen.

-- 2.0.193.0 -- 08/20/13

Fixing red dashed line issue.

Changing Connect Laser form.

-- 2.0.192.0 -- 08/16/13

Changing setup com ports connect button.

Changing print and shop sheet to job name + print / shop sheet.

-- 2.0.191.0 -- 08/14/13

Add Segment and Erase icon on main right menu.

Origin Point (0,0) of laser a snap point when Display Measured Points is active.

Remove the word "quick" from Options / General Settings / Misc Settings / Display Large Quick Color Boxes.

Export 1 3D file for each page.

In Setup Device title bar, "Connect" changed to "Establish a Connection with a Device".

-- 2.0.190.0 -- 07/31/13

Always display the lock in horizontal window.

Split Line and Arc based on a point (from trade show).

Adding Segment and adding Draw and Erase on right hand menu (from trade show).

-- 2.0.189.0 -- 07/30/13

Remove the customer upgrade agreement if the user isn't connected to the internet.

Fixing languages that requires special characters (Swedish).

Re-sizing the pages to estimate screen.

-- 2.0.188.0 -- 07/22/13

Ensuring that if there are no pages to save the job still saves properly.

Attempting to correct issue with DWG output.

-- 2.0.187.0 -- 07/17/13

Correcting issue if both 2D and 3D laser have com ports setup.

-- 2.0.186.0 -- 07/16/13

Fixing offsets for LT-2D3D.

Fixing wording for LT-2D3D.

Fixing saving images for encrypted units.

-- 2.0.185.0 -- 07/16/13

Fixing edit menu to ensure undo/redo show up when application first starts up.

-- 2.0.184.0 -- 07/09/13

Correcting issue if both 2D and 3D laser have com ports setup.

Sending Lock Horizontal to top most screen.

Sending Registration Form to top most screen.

-- 2.0.183.0 -- 07/09/13

Correcting seam issue.

Adding stopwatch to get measurement timings.

-- 2.0.182.0 -- 07/08/13

Adding Job Tracker 4.0.

Adding squared area to estimate, printout, and area legend.

Checking in missing file.

-- 2.0.181.0 -- 07/02/13

Fixing display color name issue.

Fixing point issue with DWG output.

Adding re-level laser.

Adding re-level laser when new page is added and when new job is created.

-- 2.0.180.0 -- 06/24/13

Removing non-working template backsplash.

-- 2.0.179.0 -- 06/22/13

Removing Disto 3D registration.

-- 2.0.178.0 -- 06/21/13

Outputing dashed lines correct. Changing Basses to Bases.

-- 2.0.177.0 -- 06/17/13

Backing up settings files and using them if the other files aren't found.

-- 2.0.176.0 -- 06/11/13

Fixing lock on LT-2D3D.

-- 2.0.175.0 -- 05/28/13

Fixing Language issue if shortcut has incorrect path.

Adding horizontal lock.

-- 2.0.174.0 -- 05/23/13

Allowing encrypted units to save images.

-- 2.0.173.0 -- 05/22/13

Fixing offset issue when using quick actions.

-- 2.0.172.0 -- 05/15/13

Fixing installer issue.

Adding ability to clear com ports.

Adding device tester (for LT-2D3D).

Fixing missing files.

Adding additional missing files.

Getting device tester up and running.

-- 2.0.171.0 -- 05/14/13

Fixing 3D laser measuring so the drawing isn't mirrored.

-- 2.0.170.0 -- 05/14/13

Attempting to fix laser device.

Correcting 3D laser measure issue.

-- 2.0.169.0 -- 05/10/13

Modifications for the new 3D laser measurements.

-- 2.0.168.0 -- 04/30/13

Adding template backsplash for 3D units.

-- 2.0.167.0 -- 04/28/13

Moving 3D DXF numbers to different layer so that they can be turned on and off.

Moving text box on Save to top of window to accommodate new tablet keyboard on Windows 8.

-- 2.0.166.0 -- 04/28/13

Failed build.

-- 2.0.165.0 -- 04/27/13

Fixing last little fixes to ensure 3D laser is working.

-- 2.0.164.0 -- 04/27/13

Fixing new laser ensuring it measures accurately and adding 3D dxf file.

-- 2.0.163.0 -- 04/26/13

Adding offset degrees for 3D laser.

-- 2.0.162.0 -- 04/25/13

Attempting to fix 3D laser measurements.

-- 2.0.161.0 -- 04/24/13

Attempting to clear up issue with user settings being lost.

Adding right left rotating offset for the LT3D device

Fixing setup com ports to use real folder location.

-- 2.0.160.0 -- 04/22/13

Adding CMs.

Fixing MMs.

Fixing issue when hitting cancel from connect to laser.

Attempting to fix issue with maximum dimension.

-- 2.0.159.0 -- 04/15/13

Fixing move shortcuts to left.

Fixing input parse error for John.

-- 2.0.158.0 -- 04/3/13

Avoid backups if not in standard saving location.

-- 2.0.157.0 -- 04/2/13

Fixing the opening / saving of an existing lt55 file.

-- 2.0.156.0 -- 03/28/13

Updated Sinks/2bowlSink.dxf due to an incorrect (0,0) point.

Fixing the opening / saving of an existing lt55 file.

Adding ability to skip the backup when the job is saved.

Fixing opening l55 files if the file name has a space in it.

-- 2.0.155.0 -- 03/22/13

Ensuring customer info is the front screen, and that the registration form is the front screen.

-- 2.0.154.0 -- 03/21/13

Ensuring customer info is the front screen, and that the registration form is the front screen.

Fixing page numbering per Brian request.

Resizing edit menu to always fit (down to 6pt font).

-- 2.0.153.0 -- 03/18/13

Removing context menu for pages.

Fixing sending debug email.

Fixing issue where dxf and dwg files are not saved when the customer outputs page images.

Fixing issue with dxf and dwg files being removed.

Fixing naming of pdf for print and for shop sheet.

Fixing undo when page was removed.

-- 2.0.152.0 -- 3/18/13

Ensuring that the 3D laser connects up and runs the unit properly.

-- 2.0.151.0 -- 03/18/13

Fixing printing pdf issue.

Fixing estimate issue on PDFs.

Fixing issue with very long edge names.

-- 2.0.150.0 -- 03/17/13

Additional debugging to help with save issues.

-- 2.0.149.0 -- 03/14/13

First checkin for 3D laser.

Hiding 3D screen till 3D is ready.

Fixing dxf issue.

Fixing issue with menu items on main screen.

Adding email settings to error message.

Adding Email server to statistics to learn what customers use.

-- 2.0.148.0 -- 03/11/13

Fixing issue with input on slab layout.

-- 2.0.147.0 -- 03/07/13

Adding new Chinese.txt

Adding settings folder to the advanced setting of options.

-- 2.0.146.0 -- 03/04/13

Removing extra slash from install path in the installer.

-- 2.0.145.0 -- 02/26/13

Remove black bars from images taken within the LT55 app. This will only effect new images taken, not existing images.

-- 2.0.144.0 -- 02/26/13

Remove black bars from images taken within the LT55 app. This will only effect new images taken, not existing images.

-- 2.0.143.0 -- 02/25/13

Fixing shortcut duplicate issue fround by John.

Fixing save as advanced with dxf or dwg files.

-- 2.0.143.0 -- 02/21/13

Upping write timeout on serial ports.

-- 2.0.142.0 -- 02/21/13

Rebuild of 2.0.141.0.

-- 2.0.141.0 -- 02/21/13

Raising real error when creating shop sheet.

Disconnecting properly if the user pulls the encoder plug.

-- 2.0.140.0 -- 02/20/13

Fixing where settings go for XP User.

-- 2.0.139.0 -- 02/19/13

Adding context menu to notes in job Menu.

Adding smarter area Perimeter legend.

-- 2.0.138.0 -- 02/19/13

Using colors from saved file for edge types.

Changing box size for color screen based on user selection (use large box).

Fixing arc issue when going counter clockwise.

Fixing polygon issue.

-- 2.0.137.0 -- 02/18/13

Removing quick colors, moving color from edit back to main screen due to user confusion.

-- 2.0.136.0 -- 02/18/13

Fixing DWG file saving.

-- 2.0.135.0 -- 02/17/13

Fixing issue with advanced saving of dxf and dwg files.

-- 2.0.134.0 -- 02/15/13

Rebuild of 2.0.133.0.

-- 2.0.133.0 -- 02/15/13

Changing write timeout to 3 seconds from 500MS.

-- 2.0.132.0 -- 02/13/13

Latest fixes (2.0.131.0) stopped allowing windows 8 machines to register Laser. This fixes that problem.

-- 2.0.131.0 -- 02/13/13

Ensure that laser works on 64 bit machines.

-- 2.0.130.0 -- 02/13/13

Setting laser write timeout to infinite to hopefully correct laser issues in 2.0.

-- 2.0.129.0 -- 02/13/13

Logging stack trace if laser raises disconnected.

Fixing issue with opening files.

-- 2.0.128.0 -- 02/13/13

Attempt to fix com port issue.

Updating Save as Advanced to save all pages.

-- 2.0.127.0 -- 02/12/13

Fixing add angle tip.

Fixing Grey and Purple Colors.

Fixing blank edge type issue.

Moving application data to C:\Users\{UserName}\AppData\Roaming\LT55-XL\v2.0 to get around UAC issues.

Fixing copy directory issue.

Changing Job Info to Job Info / Pages.

Not display an message box if the user can't read the registry.

-- 2.0.126.0 -- 02/12/13

Attempting to track down why laser disconnects.

-- 2.0.126.0 -- 02/12/13

Attempting to track down why laser disconnects.

-- 2.0.125.0 -- 02/06/13

Adding ability to mark up images within MS Paint.

-- 2.0.124.0 -- 02/05/13

Fixing DXF issue for GMM and Park saws.

-- 2.0.123.0 -- 02/04/13

Fixing scrollable quick actions in fillet, offset, etc.

Fixing DXF file creation (re-adding back indention).

Fixing DXF file creation (not exporting line type if BYLAYER).

Fixing calculator, removing selected text if erase button is pressed.

-- 2.0.122.0 -- 02/01/13

Fixing issue with saving to a network share.

-- 2.0.121.0 -- 01/30/13

Ensuring we save all the pages, not just a single page.

-- 2.0.120.0 -- 01/29/13

Fixing issues with naming DXF files.

-- 2.0.119.0 -- 01/29/13

Ensuring build creates correct directories.

-- 2.0.118.0 -- 01/29/13

Adding spacer between connect to laser and Exit.

Ensuring we save the colors as they are changed.

Adding legend (without area or perimeter) accessible through options.

Fixing issue with About ensuring that the version number is displayed.

Removing inadvertent checkin.

Ensuring that the bluetooth laser operates as it did in 1.0.

-- 2.0.117.0 -- 01/28/13

Adding ability to change resolution when adding photos.

-- 2.0.116.0 -- 01/26/13

Defaulting colors based on estimate settings in 1.0.

Adding a button from Advanced in options that will reset colors based on the estimate settings file from 1.0.

Fixing issue with DXF generation not finding correct layer name.

Fixing broken build.

-- 2.0.115.0 -- 01/25/13

Fixing Error Display.

Including settings files when an error is thrown.

-- 2.0.114.0 -- 01/24/13

Adding back pages to Print.

Adding scroll bar to quick actions.

Removing blank file drop in quick actions.

Fixing mirror issue with drop ins.

-- 2.0.113.0 -- 01/23/13

Selecting first text box if calculator pad is present.

Fixing issue with the saving of notes to ensure the include line endings.

Increasing speed of the drawing by eliminating drop ins and capping at 300 objects to Estimate.

Adding Display Area Legend to View Menu.

Updating manual.

-- 2.0.112.0 -- 01/22/13

Adding ability to double the size of the color selector box.

-- 2.0.111.0 -- 01/22/13

Adding key pad back to Backsplash, Bump out, create line, custom box, draw circle, fillet, and offset.

-- 2.0.110.0 -- 01/22/13

Fixing slow down in application when using area legend.

Showing suitable message when no web camera exists.

-- 2.0.109.0 -- 01/22/13

Add label to quick color.

Keep notes when undoing and redoing.

Keeping user in action when undo, redo, zoom in, zoom out, or best fit.

Adding Default Camera ability in Add Photo.

-- 2.0.108.0 -- 01/15/13

Correcting Fillet Issue.

-- 2.0.107.0 -- 01/15/13

Adding Manual in PDF version.

-- 2.0.106.0 -- 01/15/13

Fixing installer issue with new camera filter.

-- 2.0.105.0 -- 01/14/13

Several changes to prep for 2.0 launch.

-- 2.0.104.0 -- 01/10/13

Additional changes for webcam support.

Fixing bad image issue with DWG file creation.

-- 2.0.103.0 -- 01/09/13

Preventing layer exception when creating layers for DWG file.

-- 2.0.102.0 -- 01/07/13

Adding support for additional web cams and improving resolution on many devices.

Updating installer for new webcam SDK.

-- 2.0.101.0 -- 01/07/13

Adding ORD file saving.

-- 2.0.100.0 -- 12/11/12

Fixing CSV File for version 2.0.

-- 2.0.99.0 -- 12/11/12

Fixing trials with version 2 if not running as admin.

-- 2.0.98.0 -- 12/06/12

Ensure images can be deleted.

Renaming control hoster to Registration.

Fixing Drop in in Version 2.0

Attempt to fix trial licenses (may need additional work)

Fixing Start New line

Fixing file label in save as

Removing Advanced update from start menu (new installations only).

-- 2.0.97.0 -- 11/28/12

Fixing issue for Dan (size of font on right, and position of undo/redo).

Fixing options not allowing or or cancel to work.

-- 2.0.96.0 -- 11/28/12

Reverting to old version of WebCam photo capture until new method can be implamented for Acer w510.

-- 2.0.95.0 -- 11/26/12

Fixing spashscreen display issue on Acer w510.

-- 2.0.94.0 -- 11/26/12

Fixing menu layout displsy issue on Acer w510.

-- 2.0.93.0 -- 11/14/12

Fixing sever issues for 2.0.

Asking for admin rights for certain portions of Application.

Using .net 4.0 across executables.

-- 2.0.92.0 -- 11/10/12

Fixing template wall on Disto 3D.

-- 2.0.91.0 -- 11/10/12

Fixing first measurement taking by V2.0 of software.

-- 2.0.89.0 -- 11/1/12

Fjxing 3D registration.

-- 2.0.88.0 -- 11/1/12

Fixing issues with Disto 3D connection.

-- 2.0.87.0 -- 11/1/12

Adding ability to choose which files are saved when saving a job (dxf or dwg).

Fixing undo issues (from Brian e-mail).

-- 2.0.86.0 -- 10/30/12

Adding ability to open DWG files and adding ability to use DWG when adding a new page.

-- 2.0.85.0 -- 10/29/12

Minor DWG change.

Additional dwg change.

-- 2.0.84.0 -- 10/29/12

Fixing windows 8 connection issues to laser.

Updating COM Port selector to write to the correct directory.

Defaulting user settings to color instead of edge type in application.

-- 2.0.83.0 -- 10/28/12

Adding fixes for Quick Color and Color screens. Mostly around the sizing of the columns within the colors, and changing from buttons to radio buttons on the quick color window.

-- 2.0.82.0 -- 10/17/12

Adding fixes for fraction parsing (reported by John).

-- 2.0.81.0 -- 10/02/12

Adding ability to only save the DWG file.

-- 2.0.80.0 -- 09/06/12

Correcting save dxf issue in version 2.0.

-- 2.0.79.0 -- 08/24/12

Fixing selection when in mirror mode.

-- 2.0.78.0 -- 08/22/12

Fixing revise and revise all issue on quick color.

-- 2.0.77.0 -- 08/13/12

Using new software address for laser products.

-- 2.0.76.0 -- 08/13/12

Changing quick color to look like standard color.

-- 2.0.75.0 -- 08/07/12

Removing save from connect to leica form.

Fixing seam issue, identified by customer.

Default to display edge type instead of color.

Fixing email issue without verisioned files.

Removing un-necessary files..

-- 2.0.74.0 -- 7/25/12

Changing quick color control based on feedback from Brian.

-- 2.0.73.0 -- 7/23/12

Adding ability to delete additional items.

Fixing issue when you delete pages ensuring the page is removed.

-- 2.0.72.0 -- 7/25/12

V2 Issues and changing menus.

-- 2.0.71.0 -- 7/18/12

Added on the fly size change to Draw Line, Arc, Circle and Bumpout.

Reorganized Import/Export menu.

Remove all "Draw" and "Add" before each function in the Draw menu. On "Custom Box", remove "Custom" so it is just "Box."

Change Draw Line in right menu to Draw Segment.

Make Pages tab between Additional Items and Agreement.

Move Pages into Job Info.

Finalized Edit menu order.

Move Notes into Job Info as tab after Pages and before Agreement.

-- 2.0.70.0 -- 7/17/12

Moving screens to the Job Data Control.

-- 2.0.69.0 -- 7/10/12

Fixing wired units and adding debugging for serial ports.

-- 2.0.69.0 -- 7/10/12

Adding Quick color control.

-- 2.0.68.0 -- 7/09/12

Adding more tips and correcting spelling mistakes.

Adding right and left hand European seams and removing the original European seam.

Add JobImportFile.txt to the directory so that the customer can doesn't need to create it themselves.

Changed Split Line text.

Fixing signature control.

Correcting the installer issue.

Fixing DXF files in installer.

Starting on Quick Colors.

-- 2.0.67.0 -- 6/18/12

Removing variable lt laser adjustment.

-- 2.0.66.0 -- 6/15/12

Fixing alignment issues on color screen.

-- 2.0.65.0 -- 6/13/12

Correcting offset based on device.

-- 2.0.64.0 -- 6/12/12

Add Default Text Color into the color menu.

Correcting circle size rounding issue

Change "Seem" in colors menu to "Seam"

-- 2.0.63.0 -- 6/10/12

Adding clear to ensure the laser works the first time connected.

-- 2.0.62.0 -- 5/28/12

Correcting estimate settings issue reported by John when upgrading to version 2.0.

-- 2.0.61.0 -- 5/24/12

Fixing metric issue.

Adding user option for Radius on drawing.

-- 2.0.60.0 -- 5/23/12

Better handling the bluetooth connection helper. Fixes program responding "Unable to find appropriate device" even when it connects.

Add instructions to Add Center Line placeholder.

Change "Radus" to "Radius"

Add "%" after Custom in Flip/Scale.

Remove Rotate from Draw menu. Duplicated function from the right had drawing menu.

Sync DXF files when opening LT55 file - change to "LT-55 XL job file" at the end.

Export PDF in black white with edge treatments needs a / or & in between "black white"

-- 2.0.59.0 -- 5/10/12

Changing from color to Edge Type based on a options.

Allow user to revise the color/edge type of multiple items simultaneously (similar to slab layout).

-- 2.0.58.0 -- 5/8/12

Adding Add Center Line based on feedback from Kyle.

-- 2.0.57.0 -- 5/8/12

Minor changes to Draw Menu.

-- 2.0.56.0 -- 5/8/12

Changing Export to Import/Export.

Adding Import items to Import/Export menu.

Moving Add Text and Draw Custom box to the bottom.

Adding tips for split line.

Remove dimensions from view menu.

Changing Color Names to Display Color Names on View menu.

-- 2.0.55.0 -- 5/7/12

Moving Existing Settings.

Adding ability to search for jobs with maroware job tracker.

Adding validations to split line.

Moving menu items (per Brian dev email).

Fixing issue with laser com ports being overwritten when connecting to the laser.

-- 2.0.54.0 -- 4/29/12

Adding language support for new features.

Removing accents from DXF File.

-- 2.0.53.0 -- 4/26/12

Renaming control to search for Job tracker job.

Removing retail from AddAdditionalItem.

-- 2.0.52.0 -- 4/25/12

Allowing to customer agreement and company info to be in Chinese (specify encoding in first line).

Allow user to add additional job items via the the catalog button on the Additional items screen.

-- 2.0.51.0 -- 4/24/12

Disconnecting the laser if the USB encoder is unplugged.

Adding Job Tracker interface, syncing with job data, and uploading files.

-- 2.0.50.0 -- 4/23/12

Adding thickness and stone color to material, and transferring on estimate screen.

Adding Page, Sink, and Cooktop to available import data from csv file.

-- 2.0.49.0 -- 4/20/12

Only showing a couple columns on the import job data grid.

-- 2.0.48.0 -- 4/19/12

Only display web cam selector if the web cam count is greater then 1.

Adding support for importing job data.

-- 2.0.47.0 -- 4/17/12

Variety of changes including new web cam support, fixing English tips, starting on Import Job Data.

Fixing user setting for importing job settings.

-- 2.0.46.0 -- 4/10/12

Adding ability to email multiple people (comma or semicolon separate the email addresses).

Adding ability to not email a zipped file.

Beginings of center line enhancement for Style Stone.

-- 2.0.45.0 -- 3/29/12

Making PDF black and white instead of the DXF file.

-- 2.0.44.0 -- 3/29/12

Export line treatments to dxf file and all black.

-- 2.0.43.0 -- 3/3/12

Fixing issue with position of the legend text.

-- 2.0.42.0 -- 3/21/12

Adding ability to split a line based on a entered distance.

-- 2.0.41.0 -- 3/14/12

Adding area legend. Can be enabled in the options screen.

-- 2.0.40.0 -- 3/13/12

Adding company registration info during registration.

-- 2.0.39.0 -- 3/8/12

Allowing saving of both lt55 and dxf.

Changing LT55 to LT-55 XL

-- 2.0.38.0 -- 3/08/12

Adding reposition laser unless the user is templating a wall.

-- 2.0.37.0 -- 3/07/12

Checking for file existence before copying settings.

Defaulting only user settings to on.

-- 2.0.35.0 -- 3/07/12

Adding ability to select which items are imported or exported.

-- 2.0.34.0 -- 3/07/12

Adding importing and exporting of settings.

-- 2.0.34.0 -- 3/06/12

Adding convert drop-ins to/from imperial/metric.

-- 2.0.33.0 -- 3/06/12

Fixing issue with auto update. Adding conversion ability when opening dxf files (convert from mm, convert from inches).

-- 2.0.32.0 -- 3/06/12

Modification to the TranslateResult to handle measurements from D8 and 330i.

Fixing issue when changing languages.

Fixing issue when using Quick Actions.

-- 2.0.31.0 -- 3/02/12

Fixing installer to target 32 bit machines.

Reducing font size

Naming fields on registration screen

-- 2.0.30.0 -- 3/02/12

Changing password for FTP server for uploading of program.

-- 2.0.29.0 -- 3/01/12

Adding Auto Register pointing to real webserver.

Porting changes, adding auto registration.

-- 2.0.28.0 -- 2/21/12

Adding disto 3d support to version 2.0

-- 2.0.27.0 -- 1/09/12

Correcting page delete function to correct issue where deleting a page throws an error message.

-- 2.0.26.0 -- 1/04/12

Fixing DXF Save issue.

Updating statistics to website instead of email.

-- 2.0.25.0 -- 1/03/12

Adding Range.dxf.

Adding lines with teeth.

Adding new splash screen.

-- 2.0.24.0 -- 12/27/11

Adding dependencys.

Checking in assemblies for autocad.

Ensuring that auto cad will work.

Adding ability to start debugging by holding shift while launching the application.

Removing unnecessary files.

-- 2.0.23.0 -- 11/30/12

Updated FTP Server information for nightly build updates.

-- 2.0.22.0 -- 11/29/11

Added Moraware Jobtracker functionality.

Using 32 bit version of acdbmgd.dll.

Removing installer changes for autocad till I can figure them out.

-- 2.0.21.0 -- 10/26/11

Adding Flip and Scale functions.

-- 2.0.20.0 -- 08/17/11

Allow user to save quick actions.

-- 2.0.19.0 -- 08/16/11

Fixing Tips.

Allowing for quick action drop-ins.

-- 2.0.18.0 -- 08/11/11

Adding Units Control.

Other issues from version non version 2 updates.

-- 2.0.17.0 -- 08/08/11

Adding diameter to circle screen.

-- 2.0.16.0 -- 08/07/11

Adding ability to customize backsplash on the fly using new framework (similar to fillet, offset, etc).

-- 2.0.15.0 -- 08/03/11

Fixing issue on edit menu text sizing.

Adding ability to customize custom box sizes when created.

Adding ability to press F2 and edit the current page name.

-- 2.0.14.0 -- 07/29/11

Using common control for Job Info Screen.

Making fillet, pages consistent with new screens.

Added icons.

-- 2.0.13.0 -- 07/16/11

Using common control for Job Info Screen.

Using common control for Options Screen.

Moving menu items around.

-- 2.0.12.0 -- 06/28/11

Adding ability to change fillet, offset, line, circle radius on the fly.

-- 2.0.11.0 -- 06/05/11

Variety of 2.0 Fixes.

Removing need for PLT.Devices.dll.

Adding default color for Backsplash.

Adding backup to SD (when you save to harddrive) or Harddrive (when you save to sd card).

Removing devices folder.

-- 2.0.10.0 --05/18/11

Removing dxf files when the pages are removed.

Adding new menus

Adding setup com ports

-- 2.0.9.0 -- 05/03/11

Test Pringing.

Correcting estimate issue.

Changing to use icons on left bar.

Fixing polygon issue.

Fixing Sort exception on polygons.

First pass at new colors within the applicaiton.

Adding required App.config.

-- 2.0.8.0 -- 03/10/11

Add ability to specify a directory for user settings. It is configurable in options.

-- 2.0.7.0 -- 03/09/11

Splitting user settings into multiple files to make it easier to share settings from machine to machine. Three settings files will be created : settings.txt, machine_settings.txt, email_settings.txt.

-- 2.0.6.0 -- 03/08/11

Starting on allowing additional colors, all backend work.

Copying to harddrive if saved to SD card.

-- 2.0.5.0 -- 03/06/11

Correcting bluetooth issues.

Correcting "Are you sure you would like to close without saving?"

-- 2.0.4.0 -- 03/28.11

Adding bump out to common controls.

Adding backsplash to common controls.

Adding draw circle to common conrols.

Adding drop in to common controls.

Adding offset to common controls.

Correcting several bluetooth issues including keeping the device awake when the application is active.

-- 2.0.3.0 -- 02/28/11

Adding Fillet and Create Line to be consistent with each other.

Adding preview to rotate drawing form.

-- 2.0.2.0 -- 02/23/11

Porting 1.x.x.x changes to version 2.

-- 2.0.1.0 -- 02/23/11

Updating naming scheme

-- 1.0.576.0 -- 10/14/13

Accidental build. See 2.0.208.0.

-- 1.0.575.0 -- 04/24/13

Attempting to clear up issue with user settings being lost.

-- 1.0.574.0 -- 01/29/13

Fixing issue with checking for if 2.0 is available and making dialogue box appear on top of software splash screen.

Fixing build issue.

-- 1.0.573.0 -- 01/18/13

Fixing 2.0 upgrade tool.

-- 1.0.572.0 -- 01/15/13

Several changes to prep for 2.0 launch.

-- 1.0.571.0 -- 11/08/12

Excluding invisible items when estimating.

-- 1.0.570.0 -- 09/19/12

Adding fixes for fraction parsing (reported by John).

Fixing 2.0 upgrade process.

-- 1.0.569.0 -- 09/19/12

Removing some security around Disto 3D.

Adding support for upgrade to 2.0 .

-- 1.0.568.0 -- 09/06/12

Fixing email developer issue.

-- 1.0.567.0 -- 07/30/12

Fixing seam issue.

-- 1.0.566.0 -- 07/11/12

Attempt to fixed wired units.

-- 1.0.565.0 -- 07/11/12

Attempt to fixed wired units.

-- 1.0.564.0 -- 07/03/12

Fixing signature control.

-- 1.0.563.0 -- 06/08/12

Correcting clear laser command so that clearing buffer will not return 0.

-- 1.0.562.0 -- 06/08/12

Adding clear laser command and clearing buffer.

-- 1.0.561.0 -- 05/24/12

Fixing strange metric issue.

-- 1.0.560.0 -- 05/11/12

Better handling the bluetooth connection helper.

-- 1.0.559.0 -- 04/29/12

Adding webcam support and removing accents from dxf file.

Removing accents from DXF File.

-- 1.0.558.0 -- 04/06/12

Adding ability to not zip files when sending an email, based on customer feedback.

-- 1.0.557.0 -- 03/09/12

Adding reposition laser unless the user is templating a wall.

-- 1.0.556.0 --

Accounting for oddness on the Leica D8 Laser

-- 1.0.555.0 --

Fixing seem issue with duplicate seems created.

-- 1.0.554.0 --

Ensure we exit template wall mode when we move from pages or start a new LT Project.

-- 1.0.553.0 --

Correct null ref error when getting serial number from 3D Disto.

-- 1.0.552.0 --

Adding instructions for disto 3d template wall.

Turning laser on after template wall.

Disabling Calibrate laser if disto 3d is connected.

Turning on template wall if disto 3d is connected.

-- 1.0.551.0 --

Adding Disto 3D registration.

Adding Addition Logging for all Devices.

Adding application open to the statistics so we can calculate the number or times a function is used per application load.

-- 1.0.550.0 --

Adding ability to initiate debug mode by holding down control while the application loads.

Adding additional debugging for the Disto 3D laser.

-- 1.0.549.0 --

Correcting issues that require mirroring when measuring countertops with disto 3D.

Ensuring that walls template properly with disto 3D.

-- 1.0.548.0 --

Ensuring that up arrow nudges up and down arrow nudges down on the Disto 3D.

Take measurement within the application if the button is pressed within the leica software.

-- 1.0.547.0 --

Adding a variety of enhancements to ensure that the Disto works properly with all lasers and disto software.

Auto connecting to the device if the leica software is running.

-- 1.0.546.0 --

Beginnings of register 3D device.

Fixing nudge issue.

-- 1.0.545.0 --

Adding support to nudge the 3D device using the arrow keys within the application.

-- 1.0.544.0 --

Correcting lt-error email.

Minor enhancements for the 3D disto.

-- 1.0.543.0 --

FTP server pasword update test.

-- 1.0.542.0 --

Updating 3D Disto measuring capabilities.

-- 1.0.541.0 --

Adding ability to template a wall with Disto 3D

-- 1.0.540.0 --

Correcting 3D Disto measuring issues.

-- 1.0.539.0 --

Adding support for 3D disto.

Adding beeps.

Adding consolidated logic.

Adding additional files.

-- 1.0.538.0 --

Adding support for 3D disto horizontal (countertop) measurements.

-- 1.0.537.0 --

Initial check in for disto 3D.

Minimizing the time spent to re-measure if 220 error is received.

-- 1.0.536.0 --

Fixing rotate issue where rotate turned an object on its side. (Relating to 3D)

-- 1.0.535.0 --

Adding in support for 1/10ths of millimeters from D8 and 330i lasers.

-- 1.0.534.0 --

Attempting to fix error code 220 error from leica laser

Ensuring we don't turn the laser off till a menu is clicked, previously the mouse moving over the menu would turn the laser off

Adding multiplier to application for when opening DXF files that are in feet instead of inches

-- 1.0.533.0 --

Correcting circle creation issues.

-- 1.0.532.0 --

Fixing drop in issue.

-- 1.0.531.0 --

Fixing point issue in DXF files.

-- 1.0.530.0 --

Adding support for 3D drawing.

-- 1.0.529.0 --

Adding Brazilian Portuguese.txt

Adding 3D disto support.

-- 1.0.528.0 --

Minor modifications for the Disto 3D systems.

-- 1.0.527.0 --

Fixing DXF Save issue.

Updating statistics to website instead of email.

-- 1.0.526.0 --

Adding additional seams to move on snap points

Attempting to reset laser if blank error is received.

-- 1.0.525.0 --

Fixing saw dropin slab layout issue for John and the BigGuy

-- 1.0.524.0 --

Fixing issues identified with Chinese language viewing General Settings tab under Options.

-- 1.0.523.0 --

Misc updates.

-- 1.0.522.0 --

Fixing image resizing issue and ensure we save the custom report to the correct location.

-- 1.0.521.0 --

Adding HIDE_LEGEND to custom report.

Adding MARGIN_LEFT, MARGIN_RIGHT, MARGIN_BOTTOM, MARGIN_RIGHT to custom Report.

-- 1.0.520.0 --

Fixing Backup issue reported by John.

-- 1.0.519.0 --

Fixing Backup issue reported by John.

Correcting issue with text not adjusting when define zero zero is used.

Fixing inadvertent check in.

-- 1.0.518.0 --

Fixing the rotation of the custom report image.

-- 1.0.517.0 --

Hardcoding offset for 330i device.

-- 1.0.516.0 --

Ensuring we don't lock when entering slab layout.

-- 1.0.515.0 --

Ensuring that the entire drop-in can be removed.

-- 1.0.514.0 --

Allowing user to switch between BYLAYER or not BYLAYER when writing dxf file.

-- 1.0.513.0 --

Correcting estimating issue for Fred.

-- 1.0.512.0 --

Adding ctrl + shift + F10 on main screen to toggle bluetooth debugging.

Adding new_lt_bluetooth_adjustment to settings to test the new leica device.

-- 1.0.511.0 --

Correcting move issue.

Adding better error handling to the bluetooth device.

-- 1.0.510.0 --

Fixing estimation issue for customer working with John.

-- 1.0.509.0 --

Fixing tips.

-- 1.0.508.0 --

Fixing COM issue.

Moving some arc logic to a new file.

-- 1.0.507.0 --

Fixing issues for Kenn Ruckey.

-- 1.0.506.0 --

Correcting area issue found by Fred.

-- 1.0.505.0 --

Ensuring we don't remove other dxf files if we save to the dropin folder.

-- 1.0.504.0 --

Adding John Nelson to build and error emails.

-- 1.0.503.0 --

Correcting metric estimate issue.

Moving some arc logic to a new file.

-- 1.0.502.0 --

Fixing area issue on Estimate.

Fixing name and address issue on Estimate.

-- 1.0.501.0 --

Correcting fillet issue.

-- 1.0.498.0 - 1.0.500.0 --

Fixed various .dxf issues for metric found by Carl.

-- 1.0.497.0 --

Fixed .dxf issues for metric found by Carl.

Resting port 465 to 587 for gmail email accounts due top Google no longer allowing email on port 465 (unsecured email).

-- 1.0.496.0 --

Ensuring that undo and redo work properly when editing text.

-- 1.0.495.0 --

Remove invalid gmail Port 465.

Fixing delete pages for bug found by Paul P.

-- 1.0.494.0 --

Bringing template and action times down from around 15 seconds to around .5 seconds on specific jobs.

-- 1.0.493.0 --

Correcting emailing dxf issue and correcting erase segment issue.

-- 1.0.492.0 --

Removing dxf files when the pages are removed.

-- 1.0.491.0 --

Correcting bluetooth connection issue if encoder is connected after windows boots on WIndows 7 Home Premium.

-- 1.0.490.0 --

Correcting Polyine issue.

-- 1.0.489.0 --

Fixing Sort exception on polygons.

-- 1.0.488.0 --

Adding missing language text.

Correcting foreign language options text.

-- 1.0.487.0 --

Adding details to Leica laser errors.

-- 1.0.486.0 --

Correcting polygon issue found by JT.

-- 1.0.485.0 --

Adding app.config

Adding app.config to installer

Fixing app.config in installer.

-- 1.0.484.0 --

Correcting DXF errors.

-- 1.0.483.0 --

Correcting DXF Import Issue.

-- 1.0.482.0 --

Correcting estimation issue when changing the value of Area multiple times.

-- 1.0.481.0 --

Copy to hard drive if saved to the sd card.

-- 1.0.480.0 --

-- 1.0.479.0 --

-- 1.0.478.0 --

Ensuring that the laser stays active while program is running and laser is connected.

Correcting another metric issue with drawing circles.

-- 1.0.477.0 --

Adding preview to rotate drawing.

-- 1.0.476.0 --

Correcting measuring issue.

-- 1.0.475.0 --

Correcting metric issues.

-- 1.0.474.0 --

Correcting drop in issue sent by Brian.

-- 1.0.473.0 --

Correcting Import DXF issue when the import leverages blocks.

-- 1.0.472.0 --

Correcting Metric Quick Action.

Correcting emailed metric issue.

-- 1.0.471.0 --

Correcting Laser Connect Issue.

-- 1.0.470.0 --

Trying to correct issues with with COM port naming.

-- 1.0.469.0 --

Not importing objects from dxf file if the layer is not specified.

-- 1.0.468.0 --

Fixing export of [ and ]. Those characters will be removed when creating a layer name.

Fixing the issue where area doesn't ignore polygons that are completely enclosed in other polygons.

Adding additional items to the Chinese.txt file.

-- 1.0.467.0 --

Correcting Materials buttons.

-- 1.0.466.0 --

Fixing loading error (LT55.Encrypt)

-- 1.0.465.0 --

Fixing issue withing viewing My Documents in a Windows 7 environment.

Not printing black outlines when polylines are displayed.

-- 1.0.464.0 --

Fixing issue withing viewing My Documents in a Windows 7 environment.

-- 1.0.463.0 --

Adding backup of files to specified hardware location.

Fixing saving issue for customer with duplicate dxf files.

-- 1.0.462.0 --

Correcting two customer issues. One involved moving text in slab layout, the other around preventing lockup when viewing polygons.

Correcting arrows on the Slab Layout control.

-- 1.0.461.0 --

Correcting contact name.

Adding undo and redo to the add text side bar control.

Leaving polyline view on when menus or edit commands are run.

Adding move circle to allow the copy and move of a circle.

Adding distance midpoint to the view distance user display.

-- 1.0.460.0 --

Refactoring the usage of thumbnails.

Fixing font of zero issue.

-- 1.0.459.0 --

Having rotate drawing work like dropin.

Fixing font issue.

Adding missing file for build process.

-- 1.0.458.0 --

Changing to autosize label and button for other languages

Correcting install issues.

Correcting the first control that is loaded when offsetting.

Adding startup activities.

Changing installer process for VS 2010.

Correcting build issue.

Reverting move to vs 2010 because of vdproj issue.

-- 1.0.457.0 --

Upgrading to visual studio 2010.

Reverting move to vs 2010 because of vdproj issue.

Correcting re-position laser issue on new bluetooth system.

Reverting move to vs 2010 because of vdproj issue.

-- 1.0.456.0 --

Adding additional text for localization.

Fixing issue with selecting ports for the bluetooth connection.

Pressing e will allow you to edit the com ports using text.

-- 1.0.455.0 --

Fixing bluetooth device not connecting causing a long time to hit buttons in the application.

-- 1.0.454.0 --

Hard coading the laser offset into the software.

-- 1.0.453.0 --

Making drawing text faster.

-- 1.0.452.0 --

Fixing Advanced Update.

-- 1.0.451.0 --

Fixing to issues related to french.

-- 1.0.450.0 --

Adding additional logging when the device is in an error state.

-- 1.0.449.0 --

Fixing issue with seem locking up the application.

Renaming files if the page name changes only if using save with page name.

-- 1.0.448.0 --

Renaming files if the page name changes.

-- 1.0.447.0 --

Fixing multi line text issue.

-- 1.0.446.0 --

Adding Chinese Txt to the LT-55 XL Application.

-- 1.0.445.0 --

Fixing text add so that angle appears in full.

Fixing so that undo doesn't remove page properties.

Fixing rotate drawing so it behaves the same as drop-in.

Fixing issue with continuous break so that breaks that effect polygons will be appear as breaks.

-- 1.0.444.2 --

Fixing multi line text issue.

-- 1.0.444.1 --

Fixing add text control so that the angle appears on main page.

-- 1.0.444.0 --

Fixing metric text opening for customer.

-- 1.0.443.0 --

Fixing offset of circles to match Palm Code.

Adding information about why the SD card could be Locked.

A fix for the Leica D8 interface.

-- 1.0.442.0 --

Importing dxf files with dashed black color.

Only syncing dxf files if the file was modified outside of the LT-55 XL.

Fixing issue to ensure settings are used when deciding to sync dxf files.

-- 1.0.441.0 --

Adding zoom support with wheel mouse.

-- 1.0.440.0 --

Correcting issue with metric when exporting text.

-- 1.0.439.0 --

Adding diagnostics for saving.

-- 1.0.438.0 --

Attempting to fix semaphore issue.

-- 1.0.437.0 --

Making beep when measurement is received with new device.

Making sure that the measurements stay consistent with new device after rotating or repositioning the laser.

Updating the AutoUpdate tool so that the Devices file is updated for the new device.

-- 1.0.436.0 --

Adding keep alive service (ping laser every 3 minutes to keep the connection active).

-- 1.0.435.0 --

Adding option to allow .dxf files modified outside of our software to be automatically imported.

-- 1.0.434.0 --

Updating help file (within SetupLT-55XL.msi).

Including circles when estimating.

-- 1.0.433.0 --

Allow for multiple lines of text.

-- 1.0.432.0 --

Cloning all objects on a page for Copy Page.

Adding shortcuts on the main screen.

Adding button to associate csv files.

Aligning buttons on the rotate drawing screen.

-- 1.0.431.3 --

Fixing metric text opening for customer.

-- 1.0.431.2 --

Scaling text correctly when exporting to metric.

-- 1.0.431.1 --

Adding option to allow .dxf files modified outside of our software to be automatically imported.

-- 1.0.431.0 --

Updated digital manual to be current with released version.

Adding language files to the MSI.

-- 1.0.430.0 --

Adding error code 266 - Invalid Measurement.

-- 1.0.429.0 --

Requiring company info to send error email or email developer.

-- 1.0.428.0 --

Fixing issue where text shrinks each time its is saved to dxf.

Fixed issue with page name not refreshing.

-- 1.0.427.0 --

Fixing issue with open file dialog having file names on top of one another.

Adding any additional dxf files to the lt55 file when the user opens an existing file.

Adding Open Office association to CSV files (from options associate files).

-- 1.0.426.0 --

Using new encoder for Erik.

Adding clear buttons in options.

Adding rotate a number of degrees instead of just 90 degrees.

Adding date and time files in SD card and Harddrive.

Adding little box for one point line function so that the user can rotate 45 degrees and add additional lines.

If polylines are turned on send polylines to the PDF.

Renaming Rotate 90 Degrees to Rotate Drawing.

Adding confirmation to when re-position laser is successful.

-- 1.0.425.0 --

Fixing issue if value is grater then max or less then min in font size.

-- 1.0.424.0 --

Changing the web server the automatic update functions point to.

-- 1.0.423.0 --

Fixing issue with null reference with Drop-In menu.

-- 1.0.422.0 --

Fixing issue with quotes in the color name and invalid characters.

-- 1.0.421.0 --

Adding COM Port Selector.

Fixing issue with shortcut being sent to the desktop.

-- 1.0.420.0 --

Fixing text issue on the dropin.

-- 1.0.419.0 --

Fixing issue with dxf dimensions.

-- 1.0.418.0 --

Fixing issue with opening a dxf that has text from a display dimensions.

-- 1.0.417.0 --

Fixing issue with opening a dxf that has text from a display dimensions.

-- 1.0.416.0 --

Correcting issue for bluetooth connection.

1. Only reset orientation once.

2. Ping device every several minutes so connection isnt lost

3. Shutdown leica when program shuts down.

4. Only display diagnostics if set in user settings show_bluetooth_diagnostics=true.

Fixing issue with turning off and when the user settings are changed.

-- 1.0.415.0 --

Fixing laser off issue with some of the boards.

-- 1.0.414.0 --

Fixing issue with zooming when display measured points is turned on.

-- 1.0.413.0 --

Reupload of update files.

-- 1.0.412.0 --

Modifying update text in help menu.

Fixing upgrade button on upgrade form.

Adding key icon to the upgrade form.

-- 1.0.411.0 --

Allow double click to change color name.

Fixing license issue for Carl's customer.

Fixing/Implementing the rest of LT55 basic mode.

-- 1.0.410.0 --

Adding restrictions.

-- 1.0.409.0 --

Fixing arc splitting issue reported by Paul Pearson.

-- 1.0.408.0 --

Committing changes for the Leica D8 Device.

-- 1.0.407.0 --

Fixing issue with customer agreement date.

Initial check in for Leica.

Ignoring INSERT and VIEWPORT on the dxf file.

Fixing conversion utility.

-- 1.0.406.0 --

Displaying default colors properly.

-- 1.0.405.0 --

Adding additional trial keys.

-- 1.0.404.0 --

Fixing issue with dxf files not being opened by the application.

Fixing broken unit tests.

-- 1.0.403.0 --

Allow two seem lines to hit different ends of a circle and have that circle split into two arcs when in slab layout.

Fixing the intersections of a circle so that filleting arcs doesn't break with the circle split enhancement.

-- 1.0.402.0 --

Split circles into two arcs if a seem goes all the way through them when you enter slab layout so that pillers can be moved

-- 1.0.401.0-

Fixing polyline drawing when using the black screen.

-- 1.0.400.0 --

Fixing color issue when importing a dxf file.

-- 1.0.399.0 --

Adding option for a black background instead of a white background in the application when this occurs I also switch the black color and the while color drawing.

-- 1.0.398.1 --

Branching 1.0.398.0

UPDATE_VERSION 1.0.398.1

Fixing import dxf color issue.

-- 1.0.398.0 --

Displaying selected objects with dashed yellow to make them clearer per suggestion from Chris Marshall.

-- 1.0.397.0 --

Fixing issue when saving dxf before a job is created.

-- 1.0.396.0 --

Adding debuging tools. Press F11 in the application to load an object viewer.

-- 1.0.395.0 --

Fix obj ref error when delete is pressed when no files exist in open or save.

Adding option in drawing to ignore mirror when drawing Text.

Adding additional debugging information to the email developer function.

Saving file with JobName.Page Name.dxf.

-- 1.0.394.0 --

Adding translations for Carl.

Adding ability to use dxf or l55 on advanced save.

Fixing maximum dimension issue for Paul.

Modifying copy to and move to page so that the measured points will continue to move after the objects are copied.

-- 1.0.393.0 --

Fixing issue on options form reported by K&D

-- 1.0.392.0 --

Fixing Options.

Adding notes to shop sheet.

-- 1.0.391.0 --

Adding enhanced user options screen. Should be much clearer now.

-- 1.0.390.0 --

Fixing issue with clicking and it not clicking on the correct object/point (reported by Paul).

Allowing max dimension to be a little tighter on the objects.

More user settings changes.

Adding missing file for build.

-- 1.0.388.0 --

Fixing url to point to laserproductsus.com instead of lasersquare.com.

Fixing issue with drop-ins not showing correctly in bottom right of screen.

Fixing Fred's issue with extra line appearing when slab layout is used after dropping in certain drop-ins.

Adding missing file for build.

-- 1.0.386.0 --

Fixing multiple page scroll issue for Paul Pearson.

-- 1.0.385.0 --

Fixing issue where line doesn't export.

Fixing potential issue where the file is being drawn to many times when slab layout is selected.

Adding button to launch website from GMail configuration form.

-- 1.0.384.0 --

Fixing fillet issue from customer.

Fixing none on sink type.

-- 1.0.383.0 --

Putting area in the correct location on polygons.

-- 1.0.382.0 --

Fixing signature on Eee PC.

-- 1.0.381.0 --

Adding Customer Name to job info.

Adding non tablet pc Signature control.

-- 1.0.380.0 --

Adding first half of quick action text color.

-- 1.0.379.0 --

Adding versioned dxf files to the Email.

Adding support for color names to be drawn on the drawing on arcs circles and lines.

-- 1.0.378.0 --

Attempting to fix issue with machine from Poland.

Adding additional debugging details to the application.

-- 1.0.377.0 --

Fixing issue with perimeter when culture is not en-us.

-- 1.0.376.0 --

Fixing close button issue.

-- 1.0.375.0 --

Fixing issue where drawing was off center.

Adding Display Color Names.

-- 1.0.374.0 --

Fixing issues with Chris Marshall where lines and arcs in polylines are being removed from dxf files.

-- 1.0.373.0 --

Fixing issues for Fred. 1. Objects without layers or color will be removed 2. Text that include font info will be displayed correctly.

-- 1.0.372.0 --

Fixing resolution issue.

-- 1.0.371.0 --

Fixing issue with devices.

Fixing issue with high res windows 7 monitor.

Fixing issue with drop ins not previewing.

-- 1.0.370.0 --

Fixing issue with prepend pdf file.

-- 1.0.369.0 --

Adding undo and redo to dimension multiple.

Correcting custom report to allow 0 angle and 90 degree angle for image.

Fixing issue with high resolution images. Now 300 pixels per inch is no problem.

-- 1.0.368.0 --

Finishing custom report.

Fixing issue with arc exported as part of a polygon when use dxf colors is not turned on.

Fixing issue with area.

-- 1.0.367.0 --

Adding more custom report attributes.

Adding move page up and down to the Edit Pages Screen.

-- 1.0.366.0 --

Add ability to reorder pages up and down.

Default to l55 files instead of dxf in open and save (Other tab).

Adding first pass at custom reports.

-- 1.0.365.0 --

Ensuring dimension color works properly.

-- 1.0.364.0 --

Adding default dimension color.

Adding option to not include color in layer name.

-- 1.0.363.0 --

fixing security issue with registry.

-- 1.0.362.0 --

Fixing offset polygon.

Adding clear button to Logo and Shop Logo.

Fixing issue with estimate settings being erased.

-- 1.0.361.0 --

Allow users to not save the last dropin (in options) which will close all folders when they load dropin form.

Save license key if its invalid instead of making them restart the application.

Fixing obj ref error when printing shop sheet.

Adding Level tip.

-- 1.0.360.361 --

Adding tag for fixes.

Adding 360 Branch.

Fixing object reference not set to an instance of an object.

-- 1.0.360.0 --

Correcting issues with materials not being consistent between options and estimate screen.

-- 1.0.359.0 --

Adding User Tips.

Adding user tips to display for new installs.

Fixing issue with text control.

-- 1.0.358.0 --

"s" Error Email - Display message and only send email once per error.

Make text unselectable in functions - made text unselectable for several functions.

Change Window Pop-ups - Canter open/save window and make it 80 of main window.

-- 1.0.357.0 --

Ensuring that spaces can be used on page names.

Adding additional double to decimal logic.

-- 1.0.356.0 --

When offseting a scribed wall, allow the option to delete the original.

Fix illegal characters when saving files with page names.

Starting effort to switch from double to decimal.

Addin Templates to advanced update.

Adding unzip files to advanced update.

-- 1.0.355.0 --

Adding english tips.

Adding new templates.

Changing values in english.txt file.

Archive files that are deleted.

Adding legend to the corner of each image.

-- 1.0.354.0 --

Adding delete to sd card and hard drive open and save.

Fixing issue with contained polygons.

-- 1.0.353.0 --

Fixing Add Text.

Only get area for estimated pages.

Allow install date to not be defaulted.

Allow custom drop in folder.

Fixing issue with save files that was resulting in the drawing not being centered.

Remove page drawings from the printout photo section.

-- 1.0.352.0 --

Added ability to add fractions on all input distance strings.

-- 1.0.351.0 --

Refactored add page logic.

Changed Quick Action to work the same as imperial. ie. 30mm R.

Changed blue to be the default default color.

Default the estimate amounts to be zero.

Changed Copy DXF to be Import DXF.

Fixed advanced save.

Refactored add page logic.

-- 1.0.350.0 --

Added text when double click on text on side bar.

Added categories for logging (internal).

Fixed issue when opening AdvancedOpen.

Ensured that prepend pdf is always used when emailing.

Kick of different threads when saving pdf which should cut save time.

Fixed issue with editing text quick actions.

Validate that the prepend description is populated if the prepend file is specified.

Added Clear Button To Prepend PDF File.

Ensured that Available Text is ready for internationalization.

Fixed text slowdown in application.

Fixed issue with saving advanced file.

Added page name to printout above each image.

Added meters and millimeters to application.

Added ability to configure the number of decimal places for metric.

Added ability to copy page, copy dxf, or create blank when creating a new page.

-- 1.0.349.3 --

Speed up text rendering and min max calculations.

Fixed Save As Advanced issue.

-- 1.0.349.2 --

Added Clear button for prepend pdf file.

-- 1.0.349.1 --

Branched Version 349 to prepare for next week release.

Removed version.txt.

Added version.txt.

Fixed Opening Files from the advanced Tab.

Ensure that the pdf file is prepended anytime an email is sent.

Added validation to options form if prepend pdf is applied but no description.

Fixed issue when quick action text is edited.

-- 1.0.349.0 --

Added email confirmation message.

Added additional set of quick action items on the main screen.

Fixed text user actions.

Copied measured points if the entire page is copied.

Set file text box on save menus when items are selected.

-- 1.0.348.0 --

Fixed GMail instructions.

Fixed grammer error (quote after erase all warning).

Changed the way add text works so that existing text size and text can be changed.

-- 1.0.347.0 --

Fixed google email setting url.

Increased speed of drawing image by reducing resolution when displaying on the screen.

Increased wait time when using the pdf merge utility.

Changed erase all to erase all on current page.

Added Text Presenter.

-- 1.0.345.0--

Fixed LWPolyline import issue.

Changed Trial spelling error.

Added confirmation to New.

-- 1.0.344.0--

Added ability to open non standard dxf files.

Added ability to configure if invisible objects are exported.

-- 1.0.343.0--

Fixed tabbing issue on job data screen.

Added undo/redo on the Slab Layout screen.

Fixed save issue on network shares.

-- 1.0.342.0 --

Added saving of (jpg) images to the job directory.

Changed version numbering scheme to allow for planned monthly updates and bug fixes within version.

-- 1.0.0.339 --

Performance fix for saving files.

-- 1.0.0.338 --

Fixed circle diameter issue.

Fixed zoom issue (unknown user action error).

Masked email passwords.

Fixed issue with agreement screen having labels show up in the incorrect location.

-- 1.0.0.337 --

Changed Customer Agreement per meeting with Laser Products.

Appended _mirrored to dxf files saved in mirrored mode.

Only show Text Point when in an action mode that does something with the Text.

Save the color that the dxf file is imported in.

Default the dxf import to use dxf colors.

-- 1.0.0.336 --

Ensure (0,0) is displayed on drop in.

Changed offset multiple to offset polygon.

Changed manual cross to draw cross.

Added ability to toggle between snapping for manual cross or not snapping.

Changed auto fillet instructions.

Changed slab layout instructions.

Changed font size (in options) to Dimension Font Size.

Added Installer Name to job data and the printout.

Ensure center (0,0) with angle works properly.

Ensure angles can be moved and rotated.

Added zero point on text to be displayed when adding text and when text is on drawing.

Ensure crosses offset properly.

Changed cost to cost/sf on printout screen.

Changed Select to Create on printout screen.

Added Cancel to printout screen.

Added ability to edit existing quick actions (double click the quick action to edit).

Added the ability to remove materials from the estimate settings screen.

Turn off any current actions when line mode is changed.

Allow users to remove the shipped drop-ins without being prompted to re-install the program (they'll need to run this version once for that to work).

Ensure "Mirror" shows on drawing even on a new drawing.

-- 1.0.0.335 --

Fixed divide by zero issue on save and open window

Added ability for customers to send errors. Click "s" when on the error window and it will send a message to Mike and Brian.

-- 1.0.0.334 --

Ensure that when drop-ins are save an error isn't displayed.

-- 1.0.0.333 --

Ensure that management objects don't raise errors.

-- 1.0.0.332 --

Ensure that the retrieval of mac address doesn't throw an exception.

-- 1.0.0.331 --

Added Display Polylines

Added GMail Configuration to User Options.

Fixed issue with estimating multiple pages

Fixed issue with lines disappearing.

Added debug information to program load to help debug vista issue.

Fixed issue with Estimate page now displaying properly.

Added references for post sharp.

-- 1.0.0.330 --

Added support for Russian and other languages that use other character sets.

Fixed issue when saving dxf to dropin folder.

Move dimensions when center zero - zero is used.

-- 1.0.0.329 --

Ignores the SD Card when saving if the SD card is locked.

Added text to lower right in Add Text mode to allow text to be rotated 45 degrees without going back and clicking Add Text.

Center zero was moving measured points on all pages not just page that is being centered.

Fixed encoder tick count to ensure number of degrees is accurate.

-- 1.0.0.328 --

Corrected issue with user options if its opened more then once.

Added ability to hide quick actions on main screen.

Removed line from dxf when exporting a Radius.

Adding tips accessible through File->Help->Tips, and available at startup when we add tips.

Added Display Radius text to allow for R.

-- 1.0.0.327 --

Maked shopsheet invisible if in encrypted mode.

First check in for tips - More work still needed here.

Added all items on main screen to the user statistics.

Added image for tips.

-- 1.0.0.326 --

Added user statistics.

-- 1.0.0.325 --

Added checklist to beginning of print out. To get it to show up... View->Options->Advanced->Prepend To PDF Description and Prepend To PDF File

-- 1.0.0.324 --

Fixed issue with dropin when drawing is mirrored, dropin is not inserted the way the preview is orientated.

Fixed issue with feet inches not displaying correctly if inches round to 12 inches.

Adding display Radii.

Added warning to user if slab layout is used and the distance an object is moved is 0 or the angle rotated is 0.

Added missing file for the displaying of radii.

-- 1.0.0.323 --

Removed "Dont Use Horizon."

Changed "try" to "trial" and "buy" to "register."

Changed "dimension multiple" to "maximum dimension."

Changed 30 day trail to 3...

Added enhancement to area and polygon so that seems can be used to close an area.

Modifying encoder device for work that EL is performing.

Fixing inches fraction display issue. It was displaying 2 feet 12 inches now will display 3 feet.

Fixing unit tests for trial period.

-- 1.0.0.322 --

Change subject line of email to include the Job Name.

Change job name on the zip file.

Fixed resolution of the printout.

Making color visibility page by page.

Fixing issue with lines disappearing when they shouldn't disappear.

Fixing an offset multiple issueue.

-- 1.0.0.321 --

Adding dxf import support for MTEXT and LWPOLYLINE. We now support the import of LINE, ARC, CIRCLE, POINT, TEXT, MTEXT, POLYLINE, MPOLYLINE.

Adding support to move menus to left side of LT55. To activate press ctrl + left arrow to move menus left, ctrl + right arrow to move menus back right. In addition the menus can be changed by modifying the menus_on_left property in the settings.txt file.

Ensure that when center (0, 0) is used the zoom settings (min x&y, max x&y) are reset. Before this users were seeing the drawing off center after using center (0, 0).

-- 1.0.0.320 --

Read layers from dxf to pick up colors that are specified on the layer and not the entity.

-- 1.0.0.319 --

Added import of polylines.

-- 1.0.0.318 --

Fixed denominator issue.

Fixed csv estimate.

Added ability to erase circle segment. To erase circle segment click three points on the circle (in order) to create the arc that you'd like to remove. If you are using erase segment and you want to erase a segment of a line where the two points you use for the segment you'd like to remove click the second point twice. To visualize this imagine a line that runs through a circle and you would like to delete the segment that falls within the circle.

-- 1.0.0.317 --

Added ability to group estimate by page. Click View->Options->Estimate Settings->Group by page.

-- 1.0.0.316 --

Added Language Czech to application.

Fixed Last Drop In

Made number of days to add for install date configurable

Corrected text size issue, ensure the size is greater then or equal to 1 when adding text

-- 1.0.0.315 --

Fixed several items in Offset Multiple.

Added overflow button for quick actions.

-- 1.0.0.314 --

First pass at Offset Multiple - Part 2

-- 1.0.0.310 --

Dimension Multiple - Made arrows red until you can click them then they change to green.

Dimension Multiple - Put Dimension further away if the user clicks further away.

Added more logic to the estimating antilogarithm and fixing duplicate arcs.

-- 1.0.0.310 --

Corrected issue with "Don't use horizon" function.

-- 1.0.0.311 --

Corrected issue with menu items not having room to be seen on Samsung.

Maked 'Clear Selected' work on widest/longest dimension.

-- 1.0.0.310 --

Added Dimension Multiple (Widest/Longest).

Fixed issue with zoom giving an error if there are no objects on the screen.

-- 1.0.0.308 --

Added Offset Scribed Wall (Edit -> Offset Scribed Wall).

Added Object Info for debugging purposes (View -> Object Info).

Added ability to sharp fillet 2 arcs. In addition if the radius is set to zero it will sharp fillet the two arcs.

Added error message if two arcs are attempted to be filleted using a chamfer.

-- 1.0.0.308 --

Fixed bug with arc-to-arc fillet choosing the wrong arc segments to fillet.

-- 1.0.0.307 --

Fix for many arc to arc fillet situations.

-- 1.0.0.306 --

Ensure display refreshes unable to fillet. This prevents the user from seeing an invalid state.

Additional Fixes for two arc fillet.

-- 1.0.0.304 --

Added another pass at two arc fillet.

-- 1.0.0.303 --

Fix to ensure that auto scaled angles are rotated appropriately.

Only rotate the measured points on the current page. Previously all measured points were moving when a drawing was rotated 90 or altered using the rotation action.

-- 1.0.0.302 --

Added support for polylines.

Finished polyline interface.

Correcting layer name size issue.

-- 1.0.0.301 --

Corrected issue with filleting line-arc and erasing an arc segment.

-- 1.0.0.300 --

Fixed area issue where arcs on a drawing have a radius of zero.

Checked in a first pass at polyline exporting.

Add ability to Auto Scale dimensions on Dimensions and Angles. This setting can be turned off and the font size can be adjusted in the options.

-- 1.0.0.299 --

Modified fillet function.

-- 1.0.0.298 --

Remove any duplicate object.

Groundwork for offsetting multiple lines at the same time (splines).

Added shop drawing to list of files to email.

-- 1.0.0.297 --

Added ability to orientate Laser.

Disconnects if encoder disconnects.

Disconnects if Hilti disconnects.

Display message if disconnect occurs.

Allow user to reconnect without closing application.

-- 1.0.0.295 --

Corrected area issue with scribed back wall.

Initial check in of arc-to-arc.

-- 1.0.0.295 --

Optionally save each dxf file with page name. To use this option set the "Save with page names:" property on the general section of user options.

Added 1/8 1/16 1/32 1/64 1/128 instead of a text box when selecting the fraction for feet inches or inches.

Display quick action as a decimal instead of fraction if the faction isn't the same as the decimal value.

-- 1.0.0.294 --

Correcting issue when importing/exporting user settings for machines set to other cultures (Spanish, Polish, German, etc).

-- 1.0.0.293 --

Adding configuration to number of days that auto saved files are saved. Auto saved files will be saved for 10 days by default, and the user can modify this by selecting View->Options->Advanced.

Add ability for the user to preserve the colors within a imported DXF file. This allows customers to import their sinks or other templates with a variety of colors for the different elements of the DXF that concern them.

Removing debugging information from the Hilti Blue Tooth interface.

Creating Diagnostic Utility.

Adding additional page on standard printout that prints out additional page details (sink, faucet, cook top, and stone info).

-- 1.0.0.292 --

Fixed bug while program compiled.

-- 1.0.0.291 --

Corrected Auto Update bug.

-- 1.0.0.290 --

Correcting issue with encryption of user email address.

-- 1.0.0.289 --

Changed encryption strategy.

-- 1.0.0.288 --

Corrected Vista Administrator bug (Run as Administrator).

Corrected 1-Point and 3-Point circle bug.

-- 1.0.0.286 --

Changing encrypt scheme.

Simplifying Encryption.

Adding XML Adapter.

-- 1.0.0.284 --

Increasing font size on shop drawing.

-- 1.0.0.283 --

Increasing font size.

Removing e-mail settings from options if using the encrypted version of the software.

Adding hilti changes.

-- 1.0.0.282 --

Added encryption to auto update.

-- 1.0.0.281 --

Added ability to modify the Blue Tooth offset.

Added logic for encrypted version of application.

Added email functionality to encrypted version of software.

Fixed broken unit test.

-- 1.0.0.277 --

Canceling user action if the user presses cancel.

Correcting accept/cancel issue.

Don't allow user to select no template when dropping in a file to prevent exception.

-- 1.0.0.276 --

Corrected issue with small arcs making zoom work incorrectly.

Corrected issue where dimensions cannot be selected or deleted properly.

Corrected adding angle text position and angle.

Cleared signature when appropriate.

Always display job saved text box.

Fixed issue with saving and with saving photos to an opened job.

Show E-Mail and then prompting for configuration if E-Mails settings haven't been added instead of simply hiding E-Mail settings.

Corrected minor issue with email error text.

-- 1.0.0.275 --

Changed from $ sign to the local currency set on the user's computer.

Corrected build issue.

Ensure quick action text font is greater or equal to 1.

Added missing file to code base.

Adding templator printout to main screen.

-- 1.0.0.273 -- (Roll up of 1.0.1.263 -1.0.1.273)

Added text to quick actions

Added logic to handle situations where the hosting computer goes to hibernate and when the computer resumes as well.

Ensured min max is updated when slab layout moves and rotations are done.

Corrected rotate issue that effected the cached Min/Max calculations.

Added pan to move.

Added arc version of angles.

Corrected issue with text scaling and the location of the text for dimensions.

Fixed typo in directions.

Fixed application performance issue.

Corrected dimensions when .dxf is opened in CAD.

Added first pass at adding angles.

Added ability to choose items that are printed.

Updated viewfinder for photo capture.

-- 1.0.0.262 --

Updating page drop down on slab layout control when a page is added.

Adding Logo to User Options (Advanced section). It will copy the logo to Logo.jpg which is picked up by the pdf.

Leave objects selected when they are moved or copied to a page.

Correcting radius when shooting laser in 1 point circle mode (making the dimension be radius instead of diameter).

Correcting text when the text is included in a drop in.

Rotating and moving dimensions correctly.

Adding ability to configure if a secure connection should be used with the email functionality.

Correcting the cross being shown in the upper left when performing a drop-in.

Fixing issue with min/max for text entities (for zoom fit).

-- 1.0.0.258 --

Corrected License Key bug ("Bad Data" Error when entering a key).

Corrected Undo/Redo when doing the initial drawing.

Culture invariant import/export of dxf files.

-- 1.0.0.257 --

Fixed bug with small dimensions.

Fixed bug with saving .dxf files.

Fixed bug with changing pages.

-- 1.0.0.256 --

Fixes for UTF8 on European machines.

Copy Imported DXF's to other pages.

Fixing issue with saving dxf files.

Fixing issues with changing pages.

Fixed thread issue with red x on the screen.

-- 1.0.0.248 --

Fixes for parallel lines drawing lines between the two.

Corrected Best Fit when dimensions are added.

Corrected aspect ratio of photos in the view finder.

-- 1.0.0.247 --

Adding exception for failed user emails.

Fixed area function.

-- 1.0.0.246 --

Allowing non tablet PC's to add signatures.

Added ability to have several pages shared.

Added Polish language.

-- 1.0.0.245 --

Updating the way dimensions display.

Ensuring that seams that intersect arcs move properly.

-- 1.0.0.244 --

Fixed very small measuring dimensions to create greater accuracy.

-- 1.0.0.243 --

Minor fixes to the Estimate functions and Print functions.

-- 1.0.0.242 --

Fixed Save bug.

Updated Color section.

-- 1.0.0.241 --

Fixed Zoom Out bug.

-- 1.0.0.240 --

Added mass erase function.

-- 1.0.0.239 --

Updating Re-Position Laser.

Added tabs to make page switching easier.

Mirroring individual pages and making sure the .dxf is mirrored as well.

-- 1.0.0.238 --

Fixing Color Issue on Added Dimensions.

-- 1.0.0.237 --

Adding CAD style dimensions.

Export Dimensions to the dxf file.

-- 1.0.0.236 --

Made sure manual cross shows as a measured point.

Added Customer Signature on all pages in printout.

Updating area to consider seams with Slab Layout..

-- 1.0.0.235 --

Add Deselect All feature to Slab Layout.

Allow users to determine what pages should be considered when estimating.

-- 1.0.0.234 --

Updating area to consider seams with Slab Layout.

-- 1.0.0.233 --

Adding ability to edit customer agreement from Options.

Adding ability to edit company info from Options.

Split arcs when they intersect with a seem.

Adding header and footer to printout.

Adding logo.jpg (in application folder) to the printout.

Adding advanced move capabilities when seems are involved.

Fixes estimate while measuring in metric.

-- 1.0.0.232 --

Changes made for bump out, signature and erase segment of an arc issue.

Creating branch for pdf generation testing.

-- 1.0.0.231 --

Enhancing slab layout functionality.

-- 1.0.0.230 --

Correcting blank job info exception.

-- 1.0.0.229 --

Estimate/cut sheet layout updated.

Fixed zooming bug.

Adding custom box and Italian.

-- 1.0.0.228 --

Adding customer agreement to first page of printout .

Adding customer info to the estimate .

Fixed reposition laser calibration bug.

-- 1.0.0.227 --

Ensured the drawing would not randomly scale down to a smaller size.

-- 1.0.0.226 --

Cross measured with laser now shows up as a measurable point.

-- 1.0.0.225 --

Added job name to printout.

-- 1.0.0.223 --

Rewording of Auto-Fillet descriptions.

Correcting issue if the laser is used after the drawing has been rotated.

-- 1.0.0.222 --

Added German language support.

Corrected text scaling issues.

-- 1.0.0.221 --

Deactivate hidden snap points.

-- 1.0.0.220 --

Customers signature on all pages (not just on agreement).

Adding validations to Save & Job Screen for invalid characters.

Adding validations to Descriptions on color screen.

Rotate with hidden lines/layers.

-- 1.0.0.219 --

Minor fix for Arc Erase segment.

-- 1.0.0.218 --

Adding additional French/Spanish text.

Ensure when color description changes the main screen reflects it.

Minor fix for re-position laser.

-- 1.0.0.217 --

Correct DXF Issue with AutoCAD.

Hide hidden colors on estimate

Allow two point zoom while in "Slab Layout" mode.

Allow color names to be edited on color selector.

-- 1.0.0.216 --

Changes to the way dxf's are created.

-- 1.0.0.215 --

Fixed text color issue some customers were experiencing.

-- 1.0.0.214 --

Added ability to right click (tap and hold) on a color in the color window to change the type of edge for estimates.

-- 1.0.0.213 --

Check boxes added next to each color in the color window that determine if the color is visible or not (This is a progression to fully implemented layers).

-- 1.0.0.212 --

Beginnings of color disabling and exporting dxf to layers.

-- 1.0.0.211 --

Fixing DXF Export Issue making sure dashed lines work with TurboCad and AllenCAD.

-- 1.0.0.210 --

Added dashed lines to .dxf's.

-- 1.0.0.208 --

Fixed freezing issue.

Open dxf from email in our software.

Added groundwork for layers functionality (layers is not a usable feature yet).

Fixed endpoints being displayed as crosses

"Move Selection" is now "Slab Layout" since there was some confusion of the purpose of the feature.

Ensure existing files allow for saving photos.

-- 1.0.0.207 --

Variety of changes to allow jobs to be shared on the network.

-- 1.0.0.206 --

Allowing the deletion of pages from edit pages.

-- 1.0.0.205 --

Correct line fillet issue.

Correct save path in job info if user decided on path to save to.

-- 1.0.0.204 --

Adding email progress bar.

Adding default page to open and save.

-- 1.0.0.203 --

Fixed issues with rotations causing breaks in the drawing.

-- 1.0.0.201 --

Adding Estimate Description to main screen.

Adding better arc and circle Distances.

Adding 0, 90, 180, and 270 degree markers of a circle to be snap points within the drawing.

Adding ability to move items between pages.

Fixing settings removal issue when you email developer (again).

Adding additional job items catalog (more details to come when I get feedback from Gordon).

-- 1.0.0.199 --

Ensure settings file isn't deleted when e-mail developer functionality is used.

Add arc arc intersections as snap points.

Add arc circle intersections as snap points.

Add circle circle intersections as snap points.

Fixing an additional path issue if job info is entered and the job isn't saved before adding images.

-- 1.0.0.198 --

Line arc fillet issues

E-Mail developer line arc fillet issues.

Web cam path issue if the job isn't saved but has job details.

Code re-work to eliminate duplicate code.

Preliminary research on some more advanced printouts.

-- 1.0.0.197 --

Ensure panning works in mirror mode.

Add mirror to upper left when in mirror mode.

Significantly cut down on the number of auto saves.

Prompt the user if they would like to close a file that has pending changes.

Adding Validation To EMail functionality.

Add validation to ensure files aren't overwritten.

Saving last email to and email from addresses.

Adding ability to change location on hard drive to save the file.

-- 1.0.0.196 --

Correct Number pad on Quick Action form.

Changing photo format from png to jpg to save space.

Ensure that email works.

Ensure that the email pdf includes the job photos.

Adding angle control to the Import DXF (Drop in) control.

Fixing License Issue.

Making signature box more apparent.

-- 1.0.0.195 --

Correct Number pad on Quick Action form.

Changing photo format from png to jpg to save space.

Ensure that email works.

Ensure that the email pdf includes the job photos.

Adding angle control to the Import DXF (Drop in) control.

Fixing License Issue.

Making signature box more apparent.

-- 1.0.0.194 --

Added line ends that don't connect with something to contiguous breaks.

Ensure that the estimate figures the area correctly (seems need to be maroon currently).

Added customer signature (File -> Job Info -> Agreement). The user must agree to the terms (checkbox) to enable the signature.

Added customer agreement. Will show up above customer signature box, and are simply read from Customer Agreement.txt in the application directory. That file will need to be created with the companies customer agreement.

Added additional job items (File -> Job Info -> Additional Items).

Added calculator to move.

Added compass to move.

Save move distance and rotation angle to settings.txt.

Removed Image from View menu (did the exact same as best fit).

Improved the printout with Additional Items and Customer Signature.

Minor improvements and bug fixes.

-- 1.0.0.191 --

Added change log details.

Ensure that multiple clicks rapidly pressed doesn't lock device.

-- 1.0.0.190 --

Added move & rotate functionality.

Added contiguous break functionality.

-- 1.0.0.189 --

Previews when you open files.

A preview of your drop-in will show up in the lower right of the drawing that you can click. When you click it, it will rotate 45 degrees so that you can put a fancy corner in 4 differently corners without going back to the drop in screen.

Added estimate to the Print out (PDF file).

Some spelling corrections.

Turn on laser after you hit circle.

Fixes to the estimate and ensure that cutouts aren't added in. The estimate still needs some work.

Other minor fixes.

-- 1.0.0.186 --

Fixes for multiple pages.

Fixes so that you can continue to perform actions (drawing and editing) after you pan.

Subtract cutouts from the area of counter tops.

Including help file (File>Help->Manual now works!!).

Other minor fixes.

-- 1.0.0.183 --

Allowing the laser to move.

A ton of fixes.

Adding Backsplashes.

-- 1.0.0.172 --

Fix for center zero that contains arcs (best fit wasn't giving best fit).

Fix for center zero that contains drop ins (drop ins were being moved twice).

Made emails get sent a lot faster.

Clear out job/file name on main screen when File->New is pressed.

Allow the laser to be moved / or have jobs be done on multiple occasions.

A variety of other minor issues.

-- 1.0.0.169 --

Adding folder support for drop ins.

Adding backsplashes (draw add backsplash), the big guy can provide you with a better explanation of how this works.

Adding draw line back to right hand menu.

-- 1.0.0.166 --

Fixing the web cam to be larger / more responsive / better.

Added ability to view previously added images (in the add photo screen click view images).

Added progress bar to Auto Update utility.

Moved things off /on the edit bar.

Save previous versions of the dxf in the job folder for historical purposes (append name with _1, _2, _x).

Improved the speed of the application.

Increased performance when images are added to a job.

Changed the way save/open works.

Changed the way the laser mode is selected.

Added internationalization (waiting on the translated version of the applications text before sending out with different languages).

First half of adding text to the image.

-----------------------Public Release-----------------------

-- 1.0.0.157 --

Change how the laser mode is selected. !!! IMPORTANT !!! Now you will have to click on the current mode (Line, Arc, Circle, or Cross in the bottom right) and be prompted for the mode.

Corrections to program so we no longer require extra time between measurements.

Combine Draw Line and Create Line.

Added directions (display on gray bar on bottom) for all edit functions.

Moved rotate to view menu.

Moved dimensions to the view menu.

Added delete segment function (only works with lines).

Changed "Laser" to "Laser On".

Added 3-Point circle on draw circle.

-- 1.0.0.155 --

Corrections for filleting lines and arcs with radius's.

Estimating improvements.

Don't use slab area on estimate any more.

Add area of multiple counter tops in estimate.

Allow undo of rotation and the user can still measure properly.

Minor cleanups.

Speed up timing between when measurements can be taken.

Improved conversion between imperial and metric.

Began work on Dan's Mega Ultra Humungo list of things to fix/improve.

-- 1.0.0.147 --

Bump out using points instead of only lines.

Fixes and enhancements for arc to line filleting.

Print button (launches adobe pdf for easy printing of drawing and job info).

Fixes for continuous lines and arcs (first half of the fixes for rock top).

-- 1.0.0.144 --

Filleting lines and arcs with radius's.

Create line by specifying distance and angle.

Draw circle of a predetermined radius on any point in the drawing.

Minor cleanups.

Speed up files that are opened if they had photos stored with them.

Fixed installer to include update folder and necessary files in that folder.

-- 1.0.0.138 --

Ability to move a drop-in after its been added to the drawing (use the offset action and you'll be asked if you want to move the whole template).

Ability to delete a drop-in after its been added to the drawing.

Save last selected drop-in for quicker access.

Changed Finish to be OK on all forms.

Made close buttons bigger on all forms.

Added cancel buttons to all forms.

Added ability to draw arc with any three points (Draw -> Draw Arc).

Exclude drop-ins from dimensions after adding to the drawing.

Other minor fixes.

-- 1.0.0.137 --

Added bump out (Draw->Bump Out), see attached.

Save bump out settings in settings.txt file.

Cleaned up pdf generation (delete temporary images).

Added better error handling for device errors (prevent application from shutting down for a closed com port).

-- 1.0.0.135 --

Ability to change, add, and delete quick actions - View -> Options.

Ability to update email settings - View -> Options.

First pass at the Printout (PDF file).

Edit and save job information.

Open job information.

Fixes to prevent laser from locking up.

Adding addition info to distance function.

Associate l55 files with application for easy opening.

Very ROUGH pass at filleting with arcs.

-- 1.0.0.130 --

Manual Cross - Click draw -> Manual cross and then you can click anywhere on the screen to add a cross.

Quick Actions are now available for Chamfer and Sharp Corner. Simply need to edit the settings.txt and change from Radius to Chamfer or Sharp Corner

Radius Quick actions are now decorated with their type R (Radius), C (Chamfer), or S (Sharp Corner).

-- 1.0.0.129 --

Auto fillet correction to ensure that when the polygon is close the duplicate lines aren't created (offset issue Erik noticed).

Add Quick Actions to Fillet and Offset Forms.

Wait 1/2 second while mouse (or finger) is down on the screen before Pan mode is triggered.

Zoom In, Zoom Out and Best fit now do not cancel any pending user actions.

Allow a drawing to be rotated 90 degrees (View->Rotate 90).

Only allow 3 characters in the dimension fraction item.

Ensure that the Application opens above current windows.

Offset arcs correctly (along the midpoint and center point).

Allow zoom in and zoom out to work more properly after 2 point zoom.

Ensure that the overflow error occurs less and is handled by the application when drawing.

Allow the midpoint of an arc to be selectable (for draw line, drop-in, and distance).

Make the dialog box used for the application to be larger (distance, errors, etc).

Allow lines to extend to an arc or a circle.

Allow arcs to be extended to a line.

Display a message letting the user know the file was saved and where it was saved to.

Save and open from the SD card by default (if present).

Changed Drop-In rotations to be +45, +90, -45, -90 etc.

Adding setup tool (see msi below).

Adding License key to application to prevent software from being copied by clients.

Adding estimate function to the application. Outputs to a CSV file and will open the csv for you. You'll need to associate Open Office with .csv files if you'd like to launch for now. Estimate.txt is located where the application is installed.

Clear out old auto save files (if older then 5 days we remove the auto save).

Renamed LT55 to LT-55XL on splash screen.

-- 1.0.0.126 --

Photos can be taken within our app on device (File-> add photo).

Auto update.

Quick Actions.

Move erase all to view.

Erase (clicked once) now erases single entity.

-- 1.0.0.117 --

Fillet Arcs correctly when not perpendicular lines.

Use selected color for offsetting, filleting.

Display Drawing Action and Selected color in bottom right of screen.

Correcting the measuring of three point circles.

Changed to zoom section: + zoom - .

Added color to edit menu on right hand side of screen.

Ensure drawing can be rotated and measurements can still be taken. Measurements are rotated to match user rotation.

Ensured notes were being Saved.

Draw modes now recognize intersections (measure, draw line, drop in).

Attempt to fix the colors maroon and green.

-- 1.0.0.109 --

Auto filleting sharp corners.

Start new line issue.