Using Define (0,0)

If you wish to add drop-ins to the LT-55 XL software, you will need to use the Define (0,0) function. This is most commonly used if you are going to use a retail sink .dxf file and drop it into the customers template. To learn how to add drop-ins into the LT-55 XL software, please […]

Read More

Reposition Laser

When you encounter a job site where you cannot see the entire surface that needs to be templated like a pillar for example, you can use the Re-Position Laser feature to obtain all the field measurements you need. Position 1 Template the job from the first position as you normally would. Switch to Cross Mode […]

Read More

User Access Control (UAC)

If you are running the LT-55 XL Software on Windows Vista or Windows 7, you need to disable the UAC (User Access Control). To do so: Windows Vista Instructions: Click on Start (Windows Logo). Click on Control Panel. Click on View in Classic View. Double Click User Accounts. Click on Turn User Account Control ON/OFF. […]

Read More

Install CDM (USB) Driver

The CDM (USB) Driver allows the Tablet PC to communicate with the Laser/Encoder via USB. This is installed on every Tablet PC before it is shipped however if the Tablet PC does recognize the laser is connected but it will not connect through the LT-2D3D/LT-55 XL software, re-installation of the CDM Driver corrects the problem. […]

Read More

Install LT-2D3D / LT-55 XL Laser Templator Software

Download the Laser Templator software from the following link: Laser Templator Software Download. Note: Microsoft .NET 3.5 is required to be installed on your computer prior to installing the Laser Templator software. If it is not, you will be prompted to install it. Instructions can be found here: https://docs.microsoft.com/en-us/dotnet/framework/install/dotnet-35-windows-10 Note: Admin permissions are required to run […]

Read More