1. Tap Start (Bottom left Windows icon).
  2. Tap Settings (gear icon).
  3. Tap Devices.
  4. Tap Add Bluetooth Device.
  5. Ensure the laser is powered on.
  6. Select Disto XXXXXXX.
    1. If no Disto XXXXX is visible, power off the laser and then power it back on.
  7. Open the Laser Templator software.
  8. Tap File>Help>Setup Device.
  9. Select LT-2D3D R4.1 
  10. Double-tap/click on the COM port box and select COM3 or COM4.
  11. Ensure laser is still powered on and tap Connect.